5" and 7" Housing is a standard
size which accommodates 3" or 4" media for air coditioning and
6" media for refrigeration. Units can be manufactured to house up to
24" media depth.
The following information will be needed:
Ask for the application (Whether it is for air conditioning, refrigeration,
chillers, etc.)
Coil opening
CFM
Download information needed sheets:
SINGLE PASS(P or S Models)
With RESERVOIR(CE100 Model)
2 sided 1 w/ RESERVOIR and 1or 2 Single pass (CE101 or CE102 with Por S Models)
If the customer has only the coil size or opening size of the unit then:
add 5" to the height measurement for Standard P and/or S Model
add an additional 4" to the height measurement for CE-100 Model with
reservoir (total of 9")
add 6" to the width measurement for either P and/or S or CE-100 Model
NOTE: You will need 1.5 square feet of pre-cooler per
ton. (Maximum to 550 feet per minute per square foot to prevent water
carry over.)
Is the unit a multi-coiled group?
This would mean that one pre-cooler would be needed for each coil section
of the unit.
For example: If a unit has coils on 2 sides, the main pre-cooler would
be an "A" series pre-cooler with all the necessary controls
and the other unit(s) would be "B" series units with only a
needle valve for controlling the water flow over its own media section.
Please call if you need additional information.